Industries Served — Food Processing, Data Centers, Pharma & Cold Chain

Food & Beverage Processing

Temperature precision is non-negotiable in food processing. Our compressors deliver the tight temperature control required for pasteurization, blast freezing, cold storage, and process cooling — supporting HACCP compliance through integrated temperature logging and alarm systems.

Evaporating temperatures from -45°C to +15°C
HACCP-compatible construction and data logging
R-290 and R-744 natural refrigerant options

Discuss Your Food Processing Project →

Pharmaceutical & Life Sciences

Drug manufacturing and vaccine storage demand compressor systems with documented temperature stability within ±0.5°C, redundancy, and full traceability. Our variable-speed compressors maintain precise setpoints while our IoT platform provides the 21 CFR Part 11 compatible data trail that quality teams require.

Temperature stability within ±0.5°C
Redundant compressor configurations available
Audit-ready data logging and export

Discuss Your Pharma Project →

Data Center Cooling

Hyperscale and edge data centers present variable, continuous cooling loads that demand high-efficiency compressors with seamless modulation. Our VFD-integrated screw compressors achieve IPLV values below 0.50 kW/TR, contributing to PUE reductions of 0.05-0.12 points in typical deployments. Free cooling integration captures 2,000-4,000 economizer hours annually in temperate climates.

Variable speed for efficient part-load operation
Free cooling and economizer integration
Low-noise models for urban edge deployments

Discuss Your Data Center Project →

Cold Chain Logistics

Unbroken cold chain integrity depends on compressor reliability. Our systems power distribution center cold rooms, dock-level refrigeration, and temperature-controlled staging areas. IoT monitoring provides chain-of-custody temperature verification from warehouse to truck.

Rapid pull-down for dock-level staging
Multi-zone temperature capability
Remote monitoring with alerting

Discuss Your Cold Chain Project →

Commercial HVAC

Office towers, hospitals, retail complexes, and educational institutions require quiet, efficient compressors that integrate seamlessly with building management systems. Our scroll and screw compressors deliver comfort cooling with the lowest sound levels and highest part-load efficiency in their class.

Ultra-low noise for occupied-space proximity
BACnet and Modbus BMS integration
Heat recovery capable models

Discuss Your HVAC Project →

Industrial Process Cooling

Chemical processing, plastics extrusion, metalworking, and other industrial applications demand compressors that handle aggressive operating conditions. Our heavy-duty screw compressors are available with corrosion-resistant materials and ATEX-certified configurations for hazardous environments.

ATEX-certified options for hazardous areas
High ambient temperature operation to +52°C
Corrosion-resistant materials for aggressive environments

Discuss Your Industrial Project →

Operating Boundaries & Selection Considerations

Transparent engineering means disclosing where our compressors perform best — and where alternative solutions may be more appropriate.

Temperature Range Limits

Our screw compressors operate in the -45°C to +15°C evaporating range. Applications requiring temperatures below -50°C (such as pharmaceutical lyophilization or certain cryogenic processes) require cascade refrigeration systems with a dedicated low-stage compressor — not a single-stage unit.

R-290 Charge Size Constraints

Propane (R-290) compressors are subject to charge limits under EN 378 and IEC 60335-2-89 — typically 150g per sealed circuit for direct systems in occupied spaces. Large-capacity installations using R-290 require indirect systems with secondary loops, adding cost and reducing efficiency by 8-12% compared to direct expansion.

VFD Efficiency at Extreme Part Load

Variable frequency drives deliver optimal savings between 30-100% of rated speed. Below 25-30% speed, motor efficiency drops and harmonic distortion increases. Systems with frequent ultra-low load periods should consider staged multi-compressor racks rather than a single VFD unit operating below its efficient speed range.

CO2 Transcritical in Hot Climates

R-744 transcritical systems experience reduced COP when ambient temperatures exceed 35°C, as the gas cooler pressure increases above the critical point. In consistently hot climates (above 38°C design ambient), parallel compression or adiabatic gas cooler configurations are necessary to maintain acceptable efficiency — adding 15-25% to system cost.

Industries We Serve with AtlasCool Compressors